LAHAT ng produkto

Bahay / Mga produkto / Bakal na Sapatos ng Preno / VL200 Old Generation Brake Shoe

VL200 Old Generation Brake Shoe

Name: VL200 Old Generation Brake Shoe
Rating: 5 (99 reviews)

Part Number： VL200 Old Generation

Product Size： 410*200mm

Number of rivet holes: 28

Product OE number: 0270.828-7

NAUNA：VL225 Old Generation Brake Shoe
SUSUNOD：VL225 New Generation Brake Shoe

Makipag-ugnayan sa Amin

OE 0270.828-7 Old Generation

VL200 Old Generation Brake Shoe

Part VL200 410 × 200 mm 28 Rivet Holes

VL200 · classic series

The VL200 Old Generation Brake Shoe (OE 0270.828-7) is a time-tested braking solution trusted by fleet operators worldwide. Engineered with a reliable 410mm by 200mm footprint and 28 rivet holes, this shoe delivers consistent and dependable braking performance for heavy-duty commercial vehicles. Constructed from high-grade steel with proven metallurgy, it offers excellent structural integrity and thermal management for everyday operations. The Old Generation design incorporates decades of field experience, providing smooth engagement and predictable stopping power across a wide range of operating conditions. Backed by extensive real-world validation, the VL200 Old Generation remains the preferred choice for fleets prioritizing durability, straightforward maintenance, and cost-effective operation in demanding transport environments.

Core Advantages

Proven 28-hole design for balanced force
High-grade steel for long-term durability
Consistent fade resistance up to 450°C
Compatible with standard truck axles
Reduced drum wear with optimized contact

Technical Data

Size: 410 × 200 mm
Rivet holes: 28 (dia. 10.0mm)
Material: Steel (standard grade)
Friction coeff: 0.38 – 0.43
Max temp: 450°C

Vehicle Fitment

Heavy-duty trucks
Commercial trailers
Bus and coach fleets
Construction vehicles
Agricultural machinery

Applications

The VL200 Old Generation is widely used in heavy-duty trucks, commercial trailers, buses, and off-highway equipment where proven reliability is essential. Its 28-rivet configuration ensures even pressure distribution across the brake drum, making it ideal for long-haul operations, regional distribution, and demanding off-highway applications. Commonly specified as original equipment for many commercial vehicle platforms, this shoe also serves as a dependable replacement option for fleets seeking consistent performance and low total cost of ownership.

Service Notes: Inspect drums for scoring before installation. Torque rivets to 35–40 N·m using a cross pattern. Allow 200–300 km of progressive braking for proper bedding. Inspect lining thickness at 12,000 km intervals; replace when worn below 8mm.

Common Questions

Q: Is the VL200 Old Generation still available for new vehicles?

The VL200 Old Generation is primarily offered for existing fleet replacements and legacy vehicle applications. New vehicle platforms typically use the New Generation series.

Q: Can I upgrade from Old Generation to New Generation?

Yes, the New Generation shares the same footprint and bolt pattern, making it a direct upgrade option for improved thermal performance and reduced noise.

Q: What is the recommended replacement interval?

Inspect every 12,000 km under normal conditions. Replace the shoe when the friction lining wears to 8mm thickness or if cracking, glazing, or uneven wear is observed.

Q: Can this shoe be used with automatic slack adjusters?

Yes, the VL200 Old Generation is fully compatible with both automatic and manual slack adjusters, provided correct installation procedures are followed.

Mga Katulad na Produkto

tungkol sa Zhejiang Bangchi

ANG ZHEJIANG BANGCHI AUTO PARTS CO.,LTD AY EKSPERTO SA INDUSTRIYA NG PAGGAWA NG MGA AUTO PARTS

Zhejiang Bangchi Auto Parts Co., Ltd. ay isang Tsina VL200 Old Generation Brake Shoe Mga Tagagawa at Pasadya VL200 Old Generation Brake Shoe OEM Exporter, Kumpanya, na may higit sa 20 taong karanasan sa industriya ng mga produktong preno. Patuloy naming pinapabuti ang kalidad ng aming produkto sa pamamagitan ng mahigpit na pamamahala at alinsunod sa mga alituntunin ng sistema ng kalidad ng IATF 16949 at sistema ng numero ng bahagi ng FMSI. Ang layunin ng pamantayan ng FMSI ay magbigay ng data ng pagganap para sa mga aftermarket brake parts batay sa mga aprubadong specipikasyon ng Friction Materials Standards Institute. Mahalaga na ang iyong mga aftermarket na produkto ay sumusunod din sa parehong pamantayan ng kalidad gaya ng iyong mga OEM na produkto. Halimbawa, ang lahat ng bahagi ng friction material ay dapat idinisenyo upang sumunod sa parehong sistema ng pag-numero ng bahagi. Makatitiyak ang aming mga customer na ang pagbili ng iyong mga produkto at pag-install ng mga ito ay magiging pare-pareho at konsistent. Sa taunang kapasidad na higit sa 3 milyong piraso ng brake shoes, nag-aalok din kami ng mga steel brake shoes.